|
||||||
|
Eddy Correlation - Further Development and Studies of Flow and Light driven dynamics of Benthic Oxygen Exchange In this project, lead by Peter Berg from the University of Virginia at Charlottesville , we develop and test the Eddy Correlation Method, a new technique that permits non-invasive oxygen flux measurements at the seafloor. “Non-invasive” in this context means that this technology does not interfere with the flow and light regime at the study site, in contrast to benthic flux chambers that exclude the natural bottom layer currents. The main goals of this project are to further develop the technique, enhance the accessibility of the Eddy Correlation Instrument (Fig. 1) to users, and assess the potential of this technique for long-term deployments in monitoring programs.
The exchange of O2 between the seafloor and the overlying water is a key parameter in studies of marine systems as it is a good proxy for the sedimentary production and decomposition processes (Canfield et al. 1993) . However, the oxygen flux is tightly linked to the characteristics of the boundary layer flow, thus, any interference with this flow environment entails changes in the oxygen flux. For example, benthic chambers exclude oscillating flows as produced by waves and tidal currents, and this oscillation can have strong influences on the oxygen flux (see project “Biocatalytical filtration and carbon cycling in permeable shelf sediments”). Likewise, the temporal dynamics of the flux are coupled to the flow environment, thus, a method not interfering with the bottom currents is required to resolve the effect of the variations in magnitude and direction of flow. The Eddy Correlation Technique for aquatic environments is an adaptation of the Eddy Correlation method developed for atmospheric boundary layer research, where Eddy Correlation now is the standard approach to measure land-air exchanges. When used in aquatic environments, the technique derives oxygen flux from synoptic, high frequency records of vertical water motion and oxygen concentration measured simultaneously in a small measuring volume above the sediment. The flux calculation is based on the assumption that all O2 transported vertically towards or away from the sediment surface is facilitated by turbulent water motions. Oxygen consumption in the sediment, thus, causes that upward directed turbulent motion would carry water with low oxygen concentration through the measuring volume, while downward directed flow would move water with higher oxygen concentration through that volume (Fig. 2)
The averaged O 2 flux is calculated as
where the bars symbolize the averaging over the time series, and uz' and O2' are the turbulent fluctuating components of the vertical velocity and the O2 concentration. Magnitude and direction of flow and oxygen concentrations are measured using an Acoustic Doppler Velocimeter and a fast O2 microsensor.
The sediment surface area that contributes to the flux recorded by the Eddy Correlation instrument is called the “Footprint Area” and is located upstream from the measuring point (Fig. 3). It has an elliptic shape and its size depends on the measuring heights above the sediment and bottom roughness. In very shallow water, oxygen flux through the water-air interface also controls size and shape of the footprint.
Figure 3 shows that the measuring point is located at the edge of the sediment surface that causes the flux. Light and flow field over the area contributing to the flux therefore are not affected by the instrument permitting for the first time measuring O2 exchange between seafloor and overlying water under natural flow conditions. It is not possible to fully explain O2 exchange over the sediment-water interface of shallow water sediments without taking benthic primary production into account. Light intensities reaching the bottom often are sufficient to drive photosynthesis to depths of more than 40 m (Nelson et al. 1999) modulating net O2 fluxes significantly. Ensuing complex changes in sediment-water O2 flux are further complicated by the fluctuations in boundary flow and changes in bottom topography altering turbulence spectra and advective pore water exchange. We use the advantage of the non-invasive flux measurement technique to determine the influences of the natural bottom currents and light variations on the O2 exchange. In this project, we explore the advantages of the eddy correlation technique relative to traditional methods and investigate the suitability of different sensors for measurements of other dissolved species. The development seen in the atmospheric sciences, where land-air exchanges of various quantities are now measured almost exclusively by eddy correlation, suggest that this technique could become a standard method for flux measurements in the aquatic environment.
Berg, P. and others 2003. Oxygen uptake by aquatic sediments measured with a novel non-invasive eddy-correlation technique. Marine Ecology-Progress Series 261: 75-83. Berg, P., H. Roy, and P. L. Wiberg. 2007. Eddy correlation flux measurements: The sediment surface area that contributes to the flux. Limnology and Oceanography 52: 1672-1684. Canfield, D. E. and others 1993. Pathways of organic carbon oxidation in three continental margin sediments. Mar. Geol. 113: 27-40. Nelson, J. R., J. E. Eckman, C. Y. Robertson, R. L. Marinelli, and R. A. Jahnke. 1999. Benthic microalgal biomass and irradiance at the sea floor on the continental shelf of the South Atlantic Bight: Spatial and temporal variability and storm effects. Continental Shelf Research 19: 477-505.
|
| |||